Top Clip Rebar Spacer

Specifications

Product variations

Sizes and codes extracted from the legacy product table.

• TCC20

  Concrete Coverage:

  20

  Diameter (mm):

  4-16

• TCC25

  Concrete Coverage:

  25

  Diameter (mm):

  4-16

• TCC30

  Concrete Coverage:

  30

  Diameter (mm):

  4-16

• TCC35

  Concrete Coverage:

  35

  Diameter (mm):

  4-16

• TCC40

  Concrete Coverage:

  40

  Diameter (mm):

  4-16

• TCC45

  Concrete Coverage:

  45

  Diameter (mm):

  4-16

• TCC50

  Concrete Coverage:

  50

  Diameter (mm):

  4-16

• TCCM40

  Concrete Coverage:

  40

  Diameter (mm):

  40

Related products

Konsa

Rebar Chair Spacer / Cover Block

Code: R15

Konsa rebar chair spacers support horizontal reinforcement in suspended slabs, beams and floor slabs while maintaining the specified concrete cover. The concave seat accommodates rebar from 6 mm to 40 mm, with cover options from 15 mm to 150 mm. Sizes from 60 mm to 100 mm are manufactured with a wider base for improved stability on softer supporting surfaces. Typical usage is approximately 2–4 spacers per square metre, subject to the reinforcement layout and project requirements.

Konsa

Concrete Chair Spacers / Cover Blocks

Code: CR30

Konsa concrete chair spacers provide stable support for reinforcement while maintaining the required concrete cover. Manufactured from 32 MPa concrete and supplied with blackened wire ties, the spacers are water-cured for 15 days and dry-cured for a further six days to develop their intended strength. Available cover sizes and spacer diameters are listed in the product specification table.

Konsa

Heavy-Duty Plastic Chair Spacer

Code: H25

Konsa heavy-duty plastic chair spacers support horizontal reinforcement in slabs and precast concrete applications. Their small contact area helps minimise the visible footprint against the formwork, while the concave seat accommodates rebar from 6 mm to 50 mm. Cover heights range from 25 mm to 80 mm. Spacers can be supplied with galvanised binding-wire ties by adding “W” to the product code, and custom sizes are available subject to manufacturing requirements.

Konsa

Wheel Spacer / Circular Spacer

Code: WS36

Konsa plastic wheel spacers clip onto reinforcing bar to maintain consistent concrete cover around vertical reinforcement. The circular design provides support through 360 degrees, making these spacers suitable for columns, walls and beams. Multiple models are available for different rebar diameters and cover requirements; select the correct product code from the specification table for the reinforcement used on the project.