Contact Konsa for pricing and availability. Specifications are confirmed during enquiry.
Konsa butterfly wall ties connect the leaves of brick cavity walls to support stable masonry construction. They are manufactured from fully galvanised mild-steel wire, with standard lengths and wire diameters listed in the specification table. The tie length is normally selected 20–30 mm shorter than the total wall thickness, subject to the wall design. Typical usage is approximately 3–4 ties per square metre, and custom sizes can be manufactured on request.
Related products: Twisted-Pair Wall Ties (PWD Ties), Plastic Wall Ties, Brick Mesh / Brickforce, and the Brick Wall Systems category.
Need help selecting butterfly wall-tie length for your wall thickness? Our team can recommend size and typical spacing for cavity walls.
| Product Code | Total Length | Diameter (mm) |
|---|---|---|
| BW150.25 | 150 | 2.5 |
| BW180.25 | 180 | 2.5 |
| BW225.25 | 225 | 2.5 |
| BW275.25 | 275 | 2.5 |
| BW325.25 | 325 | 2.5 |
| BW225.3 | 225 | 3.15 |
| BW275.3 | 275 | 3.15 |
| BW300.3 | 300 | 3.15 |
| BW325.3 | 325 | 3.15 |
Sizes and codes extracted from the legacy product table.
Konsa twisted-pair wall ties, also known as PWD ties, connect the leaves of brick cavity walls. Manufactured from fully galvanised mild-steel wire, the twisted profile provides a practical mechanical key within the mortar joints. Select a tie length approximately 20–30 mm shorter than the total wall thickness, subject to the wall design. Typical usage is 3–4 ties per square metre, with custom sizes available on request.
Code: BT500
Konsa heavy-duty twisted wall ties connect cavity brick walls where a robust flat-bar tie is required. They are manufactured from hot-dip galvanised mild-steel flat bar, with stainless-steel versions available on request for coastal or corrosive environments. Select a tie length approximately 20–30 mm shorter than the wall thickness, subject to the masonry design. Typical usage is approximately 3–4 ties per square metre, and custom lengths can be manufactured.
Code: CCT200
Konsa Constantine wall ties provide a formed galvanised connection for brick and masonry wall construction. Standard ties are manufactured from 32 mm × 1.6 mm galvanised strip in several lengths, with custom dimensions available for project-specific details. Select the tie length, spacing and embedment according to the wall design, cavity width and applicable construction requirements.
Code: BGT180
Konsa galvanised bat ties provide a preformed alternative to cutting hoop iron when connecting brickwork to concrete columns or pillars. The flat tie can be fixed to the supporting structure using the fastening method specified for the project, then embedded into the masonry joint. Standard lengths are available, and custom lengths can be manufactured. Confirm the fixing, embedment and spacing with the wall design before installation.