Product code: FN20; FN25; FW20; FW25; FM20; FI20; FP20; FM25; FI25; FP25
Contact Konsa for pricing and availability. Specifications are confirmed during enquiry.
Konsa reusable plastic fillet corners with fixing lips create consistent chamfers while simplifying attachment to timber or steel formwork. Narrow-lip profiles can be wedged or nailed at the shutter edge, wide-lip profiles allow fixing away from the edge, and slotted versions are available for metric, imperial and P.M.I. shutter systems. Profiles are supplied in 3 m lengths; select the size and slot pattern from the specification tables.
Related products: Plastic Fillet Corners, Shutter Tape, External Corner Angles, and the Formwork Products and Accessories category.
Need assistance choosing lip style or slot pattern for your shutter system? Speak to our team for the correct fillet configuration.
| Product Code | A | B | C | D |
|---|---|---|---|---|
| FN20 | 20 | 20 | 28 | 13 |
| FN25 | 25 | 25 | 35 | 13 |
| FW20 | 20 | 20 | 28 | 50 |
| FW25 | 25 | 25 | 35 | 50 |
| Product Code | A | B | C | D | Slotting |
|---|---|---|---|---|---|
| FM20 | 20 | 20 | 28 | 50 | Metric |
| FI20 | 20 | 20 | 28 | 50 | Imperial |
| FP20 | 20 | 20 | 28 | 50 | PMI |
| FM25 | 25 | 25 | 35 | 50 | Metric |
| FI25 | 25 | 25 | 35 | 50 | Imperial |
| FP25 | 25 | 25 | 35 | 50 | PMI |
Sizes and codes extracted from the legacy product table.
Code: F20
Konsa reusable plastic fillet corners create clean chamfered edges on concrete slabs, columns, beams and precast components. They can be fixed to timber formwork with nails or screws, or attached to steel shutters using a suitable contact adhesive. Standard profiles are supplied in 3 m lengths, with dimensions listed in the specification table for selecting the required chamfer size.
Code: PS14
Konsa plastic ferrule tube spaces opposing formwork panels while creating a sleeve around through-tie rods, allowing the tie rod to be withdrawn and reused after casting. The range covers several internal and external diameters to suit different tie systems. Tubes can be supplied in 3 m lengths for cutting on site or cut to the length required for the formwork assembly.
Code: PC14
Konsa push-on plastic cones fit onto the ends of compatible ferrule tubes in formwork tie systems. After the shutters are removed, the cones can be extracted to leave a neat chamfered recess around the tie opening for subsequent grouting or finishing. Multiple sizes are available; match the cone product code to the ferrule-tube diameter shown in the specification table.
Code: P12
Konsa plastic shutter plugs close unused ferrule and tie holes in steel or timber formwork panels. The push-fit design provides a quick way to blank off openings before concrete is placed, helping reduce grout leakage through the shutter face. Plug sizes are available for shutter holes from 12 mm to 26 mm; choose the product code that matches the measured hole diameter.